Passion Mission Action

Our Products


Model No.:MDBT42TV-P192K
* Nordic nRF52805 SoC Solution
* A recommended 3rd-party module by Nordic Semiconductor.
* BT5.4 & BT5.2 & BT5.1 & BT5 Bluetooth Specification Certified.
* Certifications: FCC, IC, CE, UKCA, Telec (MIC), KC, SRRC, NCC
* 32-bit ARM® Cortex™ M4 CPU
* 192kB Flash Memory / 24kB RAM
* RoHS & Reach Compliant.
* Dimension:5.8 x 8.3 x 1.3 mm
* 10 GPIO
* PCB Antenna
* Interface: SPI, UART, I2C, PWM
* Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy and 2.4GHz ultra low-power wireless applications.
  • Raytac nRF52805 tiny and low cost modules spectrum covers MDBT42TV-192K & MDBT42TV-P192K series with both Chip Antenna and PCB Antenna option for selection. 

    Highlight of nRF52805 Solution
    * 10 GPIO
    * Tiny Size: 5.8 x 8.3 x 1.3 mm
    * Budgetary

    Module DevKit Demo Board MDBT42T-DB-05 is designed for quick testing and debugging without building your own board. The demo board employed MDBT42T-192K (Chip Antenna) module.

    For customers looking for Compact form factor may select MDBT42T series module.
    MDBT42T-192K deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT42T-P192K deployed PCB Antenna and offers a good connectivity ability.

    For customers looking for Tiny form factor may select MDBT42TV series module.
    MDBT42TV-192K deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT42TV-P192K deployed PCB Antenna and offers a good connectivity ability.

    nRF52820 Module- MDBT42T & MDBT42TV-20201123
  • Raytac's MDBT42TV & MDBT42TV-P is a BT5.4 qualifed module designed based on Nordic nRF52805 SoC solution, which incorporates: GPIO, SPI, UART, I2C, and ADC interfaces for connecting peripherals and sensors.

    Bluetooth Qualified Specification: BT5.4 / BT5.3 / BT5.2 / BT5.1 / BT5
    Regional Regulation Pre-Certified: FCC/IC/CE/Telec/KC/SRRC/NCC/RCM/UKCA

    Quick Specifications
    ‧Multi-protocol 2.4GHz radio
    ‧32-bit ARM Cortex – M4 processor
    ‧192KB flash programmed memory and 24KB RAM
    ‧Software stacks available as downloads
    ‧Application development independent from protocol stack
    ‧On-air compatible with nRF51, nRF24AP and nRF24L series
    ‧Programmable output power from +4dBm to -20dBm
    ‧RAM mapped FIFOs using EasyDMA
    ‧Flexible and configurable 10 pin GPIO
    ‧Programmable peripheral interface - PPI
    ‧Full set of digital interface all with Easy DMA including:
    ‧1 x Hardware SPI master ; 1 x Hardware SPI slave ‧1 x two-wire master ; 1 x two-wire slave
    ‧1 x UART (CTS / RTS)
    ‧2 channel 12-bit / 200KSPS ADC
    ‧128-bit AES ECB / CCM / AAR co-processor
    ‧Low power 32MHz crystal and RC oscillators
    ‧Wide supply voltage range 1.7V to 3.6V
    ‧On-chip DC/DC buck converter
    ‧Individual power management for all peripherals ‧Timer counter
    ‧3x 32-bit
    ‧2 x 24-bit RTC
  • Specification:                                                                                    
    [nRF52805] MDBT42TV-192K & MDBT42TV-P192K Spec (Ver.D)

    Design Guide includes
    MDBT42TV & MDBT42TV-P Footprint & Design Guide (230804)
    • Footprint (compatible for Protel, Eagle, Altium Design)
    • 2D/3D drawing
    • Reflow/Solder Profile
    • Spec for external 32.768KHz

    RoHS & REACH Report:
    RoHS & REACH Report for MDBT42TV & MDBT42TV-P

    Related Links:
    •   Nordic 3rd Party Modules/Modems
    (Raytac's modules are all qualified Nordic 3rd Party Bluetooth low energy module, please go following website for more detailed information.)