MDBT50-DB-33

Raytac nRF52833 module spectrum covers MDBT50-512K and MDBT50-P512K with Chip Antenna and PCB Antenna option for selection. 

Highlight of nRF52833 Solution
* Supporting BT5 Long Range Feature
* Built in USB interface

MDBT50-512K deployed Chip Antenna and offers a excellent connectivity ability & 18 GPIO.
MDBT50-P512K deployed PCB Antenna and offers a good connectivity ability & 18 GPIO..

For customers looking for nRF52833 sulotion, Regular module with 42 GPIO may select 
MDBT50Q-U512K deployed u.FL connector for External Antenna and offers a super long range connectivity ability
MDBT50Q-512K deployed Chip Antenna and offers a excellent connectivity ability.
MDBT50Q-P512K deployed PCB Antenna and offers a good connectivity ability.

For customers looking for nRF52833 sulotion, Small module with 18 GPIO may select 
MDBT50-512K deployed Chip Antenna and offers a excellent connectivity ability.
MDBT50-P512K deployed PCB Antenna and offers a good connectivity ability.



 

Raytac's MDBT50-512K & MDBT50-P512K is a BT5.2 & BT5.1 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52833 SoC solution, which incorporates: GPIO, SPI, UART, I2C,I2S, PMD, PWM, ADC, NFCandUSBinterfaces for connecting peripherals and sensors.

Quick Specification:
• ARM Cortex –M4 32-bit processor with FPU, 64 MHz
• Memory: 512KB flash / 128KB RAM
• HW accelerated security
      • 128 bit AES/ECB/CCM/AAR co-processor(on-the-fly packet encryption)
• Advanced on-chip interfaces
      • USB 2.0 full speed(12Mbps)controller
      • High speed 32MHz SPI
      • Type 2 near field communication (NFC-A) tag with wake-on field
      • Programmable peripheral interconnect(PPI)
      • 18general purpose I/O pins
      • EasyDMA automated data transfer between memory and peripherals
• 12 bit, 200ksps ADC –8 configurable channels with programmable gain
• 4 x 4 channel pulse width modulator (PWM) units with EasyDMA
• Audio peripherals : I2S, digital microphone interface (PDM)
• 5 X 32-bit timers with counter mode
• Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
• Up to 2 x I2C compatible 2-wire masters / slaves
• 2 x UART(CTS/RTS) with EasyDMA
• Quadrature decoder (QDEC)
• 3 x 24-bit real-time counters (RTC)
• Flexible power management
      • Supply voltage range 1.7V to 5.5V
      • On-chip DC/DC and LDO regulators with automated low current modes
      • Automated peripheral power management
      • Fast wake-up using 64MHz internal oscillator
      • 0.6uA at 3V in System OFF mode, no RAM retention
      • 1.5uA at 3V in System ON mode, no RAM retention, wake on RTC
• Nordic SoftDevice ready with support for concurrent multi-protocol
• Operating temperature from -40 to 105°C

Specification：                                                                                    
[nRF52833] MDBT50-512K & MDBT50-P512K Spec (Ver.B)

Design Guide includes
MDBT50 & MDBT50-P Footprint & Design Guide (210706)

• Footprint (compatible for Protel, Eagle, Altium Design)
• 2D/3D drawing
• Reflow/Solder Profile
• Spec for external 32.768KHz

RoHS & REACH Report：
RoHS & REACH Report for MDBT50 & MDBT50-P

Reliability Test Report：
MDBT50-512K & P512K Reliability Test Report (210719)

Related Links：
•   Nordic 3rd Party Modules/Modems
(Raytac's modules are all qualified Nordic 3rd Party Bluetooth low energy module, please go following website for more detailed information.)