Passion Mission Action
Our Products
AN7002Q-U
Model No.：AN7002Q-U
* Nordic nRF7002 WiFi Solution
* WiFi 6
* Dual Band 2.4 GHz and 5 GHz
* Wi-Fi specification: Wi-Fi 6
* Complies with 802.11a/b/g/n/ac/ax
* Supports Target Wake Time (TWT)
* Supports Wi-Fi 6 Station (STA)
* 20 MHz channel bandwidth
* 64 QAM (MCS7), 86 Mbps PHY throughput
* Certifications: FCC, IC, CE, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* RoHS & Reach Compliant.
* RED-DA(EN18031) Compliant.
* Dimension: 10.8 x 16.4 x 2.1 mm (0.43 by 0.64 by 0.08 inches)
* u.FL Connector
* WiFi 6
* Dual Band 2.4 GHz and 5 GHz
* Wi-Fi specification: Wi-Fi 6
* Complies with 802.11a/b/g/n/ac/ax
* Supports Target Wake Time (TWT)
* Supports Wi-Fi 6 Station (STA)
* 20 MHz channel bandwidth
* 64 QAM (MCS7), 86 Mbps PHY throughput
* Certifications: FCC, IC, CE, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* RoHS & Reach Compliant.
* RED-DA(EN18031) Compliant.
* Dimension: 10.8 x 16.4 x 2.1 mm (0.43 by 0.64 by 0.08 inches)
* u.FL Connector
Buy From
-
Raytac's AN7002Q is a low power WiFi 6 module designed based on Nordic nRF7002 companion solution and it supports dual-band 2.4 GHz and 5 GHz band operation. The antenna ports are single-ended 50 Ω and it supports 20 MHz wide channels, 1x1 Single-Input Single-Output (SISO) operation and can deliver a PHY data rate of 86 Mbps (MCS7).
AN7002Q series is a wireless module that adds low-power Wi-Fi 6 capabilities to another System on Chip (SoC), Microprocessor Unit (MPU), or Microcontroller Unit (MCU) host.
AN7002Q is compatible with IEEE 802.11ax (also known as Wi-Fi 6) and with earlier standards IEEE 802.11 a/b/g/n/ac and which has been designed for IoT applications, and is ideal for adding modern Wi-Fi 6 capabilities to existing Bluetooth® Low Energy, Thread®, or Zigbee® systems.
AN7002Q connects to the host SoC or MCU through a Serial Peripheral Interface (SPI) or Quad Serial Peripheral Interface (QSPI) serial interface (which can optionally be encrypted) and supports coexistence with other radio protocols through a dedicated 3-wire or 4-wire coexistence interface.
AN7002Q supports Station and Wi-Fi Direct operation modes as well as Software Enabled AccessPoint (Soft AP) (Wi-Fi 4 operation only) and simultaneous station + soft AP/Wi-Fi Direct/station modes. -
1. Wi-Fi® 6 companion IC with integrated RF.
2. Supports IEEE 802.11 ax and earlier standards (IEEE 802.11 a/b/g/n/ac)
3. Supports Target Wake Time (TWT), Orthogonal Frequency Division Multiple Access(OFDMA), Basic Service Set (BSS) Coloring
4. Supports Wi-Fi CERTIFIED 6™, Wi-Fi CERTIFIED™, Wi-Fi Enhanced Open™
5. Supports WPA3™, WPA2™, WPA™ - Personal and Enterprise, Protected Management Frames
6. Supports WMM®, WMM - Power Save, Wi-Fi Agile Multiband™, Wi-Fi Direct®
7. Dual-band 2.4 GHz and 5 GHz operation in 1x1 (SISO) operation.
8. 3-wire or 4-wire coexistence interface and compatible with Raytac MDBT53 series module.
AN7002Q-U Suggested Schematic Design(Click on the image to zoom in):
-
Specification：
[nRF7002] AN7002Q-U Spec (Ver.1.0)
Design Guide includes
AN7002Q & AN7002Q-P & AN7002Q-U Footprint_Design Guide (250722)- Footprint (compatible for Protel, Altium Design)
- 2D/3D drawing
- Reflow/Solder Profile
- Spec for external 32.768KHz
RoHS & REACH Report：
RoHS & REACH Report for AN7002Q & AN7002Q-P & AN7002Q-U
Related Links：
• Nordic 3rd Party Modules/Modems
(Raytac's modules are all qualified Nordic 3rd Party WiFi module, please go following website for more detailed information.)
