Passion Mission Action

Our Products

AN54LQ-PAT

Model No.：AN54LQ-PAT
* Pre-Loaded with Raytac's AT command firmware (Peripheral / Slave role)
* Nordic nRF54L15 SoC Solution
* A recommended 3rd-party module by Nordic Semiconductor.
* BT6.0 Bluetooth Specification Certified.
* Certifications: FCC, IC, CE, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* 128 MHz ARM® Cortex™ processor with TrustZone® technology
* Dimension: 9.5 x 13.7 x 1.8mm (0.37 x 0.54 x 0.07 inches)
* RoHS & Reach Compliant.
* PCB Antenna
* Interface: UART
* Operating temperature: -40 to +105°C
* MTU up to 247 bytes
* Works with MDBT50Q-RX-ATM / MDBT50Q-ATMS / MDBT50Q-PATMS / MDBT50Q-UATMS / MDBT42Q-ATM / MDBT42Q-PATM (Central/ Master role)
* Security PSA Level 3
Buy From
Product Info Specification Document
  • Raytac's AT command module series comes with AT command firmware pre-programmed which helps developers enjoy a Design Saving & Time-To-Market journey.

    For customers looking for Compact form factor and Peripheral/Slave Solution may select 
    AN54LQ-AT deployed Chip Antenna and offers a excellent connectivity ability.
    AN54LQ-PAT deployed PCB Antenna and offers a good connectivity ability.
    AN54LQ-UAT deployed PCB Antenna and offers a super long range connectivity ability.

    For customers looking for Tiny form factor and Peripheral/Slave Solution may select 
    AN54LV-AT deployed Chip Antenna and offers a excellent connectivity ability.
    AN54LV-PAT deployed PCB Antenna and offers a good connectivity ability.

    For customers looking for Good form factor and Central/Master Solution may select 
    MDBT42Q-ATM deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT42Q-PATM deployed PCB Antenna and offers a good connectivity ability.

    For customers looking for Central/Master + Peripheral/Slave Solution may select 
    MDBT50Q-ATMS deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT50Q-PATMS deployed PCB Antenna and offers a good connectivity ability.

    Testing & Debug Demo Board
    Central/Master + Peripheral/Slave: MDBT50Q-DB-ATMS
    Peripheral/Slave: AN54LQ-AT-UART-S
    Central/Master: MDBT42Q-AT-UART-M

    If you are looking for demo board for standard module WITHOUT AT command, please view AN54LQ-DB-15 for more information.
     
  • List of supported commands
    • Setting of device name
    • Choose data rate of 1Mbps or 2Mbps on-air
    • Set TX output power in 6 levels.
    • Set advertising time
    • Set connection interval under Mode 2
    • Enable/disable advertising
    • 8 sets of UART baud rates
    • Enable/disable UART flow control
    • Enable/disable interface of UART hardware
    • Power-down mode for power saving and GPIO wake-up
    • Recover-to-default setting with hardware and software method
    • System reset of hardware and software
    • Set serial number and retrieve
    • Set or retrieve MAC Address
    • Retrieve ADC value for battery detection, delivering the information through battery service.
    • Enable/disable connection command mode
    • Setting of advertising interval
    • Retrieve RSSI value of the connected
  • Specification：                                                                                    
    Coming Soon

    Design Guide includes
    AN54LQ-15 & AN54LQ-P15 & AN54LQ-U15 Footprint & Design Guide (250919)
    • Footprint (compatible for Protel, Altium Design)
    • 2D/3D drawing
    • Reflow/Solder Profile

    RoHS & REACH Report：
    RoHS & REACH Report for AN54LQ-15 & AN54LQ-P15 & AN54LQ-U15

    Related Links：
    •   Nordic 3rd Party Modules/Modems
    (Raytac's modules are all qualified Nordic 3rd Party Bluetooth low energy module, please go following website for more detailed information.)

CONTACT

MENU