Passion Mission Action

Our Products

MDBT42V-PAT

Model No.:MDBT42V-PAT
* Pre-Loaded with Raytac's AT command firmware (Peripheral / Slave role)
* Nordic nRF52832 SoC Solution
* A recommended 3rd-party module by Nordic Semiconductor.
* BT5.2 & BT5.1 & BT5 & BT4.2 Bluetooth Specification Certified.
* Certifications: FCC, IC, CE, Telec (MIC), SRRC, NCC
* 32-bit ARM® Cortex™ M4F CPU
* 512kB Flash Memory / 64kB RAM
* RoHS & Reach Compliant.
* Dimension:6.4 x 8.4 x 1.5 mm
* 20 GPIO
* PCB Antenna
* Interface: UART
* MTU upto 247 bytes
* Worked with MDBT42Q-ATM / MDBT42Q-PATM (Central / Master role)
  • Raytac's AT command module series comes with AT command firmware pre-programmed which helps developers enjoy a Design Saving & Time-To-Market journey.

    For customers looking for Good form factor and Peripheral/Slave Solution may select 
    MDBT42Q-AT2 deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT42Q-PAT2 deployed PCB Antenna and offers a good connectivity ability.

    For customers looking for Compact form factor and Peripheral/Slave Solution may select 
    MDBT42V-AT deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT42V-PAT deployed PCB Antenna and offers a good connectivity ability.

    For customers looking for Good form factor and Central/Master Solution may select 
    MDBT42Q-ATM deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT42Q-PATM deployed PCB Antenna and offers a good connectivity ability.

    For customers looking for Central/Master + Peripheral/Slave Solution may select 
    MDBT50Q-ATMS deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT50Q-PATMS deployed PCB Antenna and offers a good connectivity ability.

    Testing & Debug Demo Board
    Central/Master + Peripheral/SlaveMDBT50Q-DB-ATMS
    Peripheral/Slave: MDBT42Q-AT2-UART-S
    Central/Master: MDBT42Q-AT-UART-M

    If you are looking for demo board for standard module WITHOUT AT command, please view MDBT42Q-DB for more information.
     
  • List of supported commands
    • Setting of device name
    • Choose data rate of 1Mbps or 2Mbps on-air
    • Set TX output power in 5 levels.
    • Set advertising time
    • Enable/disable advertising
    • Set LED pattern indicating advertising or connecting status
    • 7 sets of UART baud rates
    • Enable/disable UART flow control
    • Power-down mode for power saving and GPIO wake-up
    • Support DC-to-DC and LDO power mode
    • Use internal or external 32.768KHz oscillator
    • Recover-to-default setting with hardware and software method
    • System reset of hardware and software
    • Set serial number and retrieve
    • Retrieve MAC Address
    • Retrieve ADC value for battery detection
    • Support maximum MTU 247bytes / data payload up to maximum 244 bytes
  • Specification:                                                                                    
    [nRF52832] MDBT42V-AT & MDBT42V-PAT Spec (Ver.I)

    MDBT42V-AT DK Board Schematic:
    MDBT42V-AT DK Board Schematic(nRF52832) (Ver.M5_v2)

    Design Guide includes
    MDBT42V & MDBT42V-P Footprint_Design Guide (210701)
    • Footprint (compatible for Protel, Eagle, Altium Design)
    • 2D/3D drawing
    • Reflow/Solder Profile
    • Spec for external 32.768KHz

    RoHS & REACH Report:
    RoHS & REACH Report for MDBT42V & MDBT42V-P

    Related Links:
    •   Nordic 3rd Party Modules/Modems
    (Raytac's modules are all qualified Nordic 3rd Party Bluetooth low energy module, please go following website for more detailed information.)