Passion Mission Action

Our Products


Model No.:MDBT50Q-RX
* Nordic nRF52840 SoC Solution Dongle
* A recommended 3rd-party module by Nordic Semiconductor.
* BT5.4 & BT5.2 & BT5.1 & BT5 Bluetooth Specification Certified.
* Supports BT5 Long Range Feature
* Deployed Raytac MDBT50Q-P1M Module
* Certifications: FCC, IC, CE, UKCA, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* 32-bit ARM® Cortex™ M4F CPU
* 1MB Flash Memory / 256kB RAM
* RoHS & Reach Compliant.
* Dimension:43.1 x 18 x 9.3 mm
* Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy, ANT+, Zigbee, Thread (802.15.4) ultra low-power wireless applications.
  • Raytac nRF52840 Dongle deployed MDBT50Q-P1M module which is the most convenient tool to easy the implement fo Bluetooth 5 application.

    Raytac provide a full range of modules based on nRF52840, spectrum covers MDBT50Q-1M, MDBT50Q-P1M and MDBT50Q-U1M series with Chip Antenna, PCB Antenna and u.FL connector for External Antenna option for selection. 

    Highlight of nRF52840 Solution
    * Supporting BT5 Long Range Feature
    * Built in USB interface

    MDBT50Q-U1M deployed u.FL connector for External Antenna and offers a super long range connectivity ability
    MDBT50Q-1M deployed Chip Antenna and offers a excellent connectivity ability.
    MDBT50Q-P1M deployed PCB Antenna and offers a good connectivity ability.

    MDBT50Q-DB demo board is designed for quick testing and debugging without building your own board. The board is only available with MDBT50Q-1M (Chip Antenna) module. 


    Raytac BLE Module-20191022 部落格用

  • Raytac’s MDBT50Q-RX is a BT5.4 qualifed module designed based on Nordic nRF52840 SoC solution, which incorporates: GPIO, PWM and USB interfaces for connecting peripherals and sensors.

    Bluetooth Qualified Specification: BT5.4 / BT5.3 / BT5.2 / BT5.1 / BT5
    Regional Regulation Pre-Certified: FCC/IC/CE/Telec/KC/SRRC/NCC/WPC/RCM/UKCA

    Quick Specifications
    • Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
      • -95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
      • -103dBm sensitivity in 125Kbps BLE mode (long range)
      • +8 dBm TX power (down to -20 dBm in 4 dB steps)
      • On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series 
      • Programmable output power from +8dBm to -20dB
      • RSSI (1dB resolution)
      • Supported data rates:
            • Bluetooth 5: 2Mbps, 1 Mbps, 500 kbps, 125 kbps
            • IEEE 802.15.4-2006: 250 kbps
            • Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
    • ARM® Cortex™-M4F 32-bit processor with FPU, 64 MHZ
    • Memory: 1MB flash / 256KB RAM
    • HW accelerated security
      • ARM TrustZone Cryptocell 310 security subsystem
      • 128 bit AEC / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
    • Interfaces on device
      • USB 2.0 full speed (12Mbps) controller
      • Programmable Peripheral interconnect (PPI)
      • 1 x Switch and max. 2 x LED
      • EasyDMA automated data transfer between memory and peripherals
    • 4 x 4 channel pulse width modulator (PWM) units with EasyDMA
    • 3 x 24-bit real-time counters (RTC)
    • Flexible power management
      • On-chip DC/DC and LDO regulators with automated low current modes
      • Automated peripheral power management
      • Fast wake-up using 64MHz internal oscillator
      • 0.4uA at 3V in System OFF mode, no RAM retention
      • 1.5uA at 3V in System ON mode, no RAM retention, are on RTC
    • Nordic SoftDevice ready and with support for concurrent multi-protocol
  • Specification:                                                                                   
    MDBT50Q-RX Spec (Ver.F)

    RoHS & REACH Report:
    RoHS & REACH Report for MDBT50Q-RX