MDBT50Q-RX-ATM

Raytac's AT command module series comes with AT command firmware pre-programmed which helps developers enjoy a Design Saving & Time-To-Market journey.

MDBT42Q-ATM & MDBT42Q-PATM both are Central/Master Role AT Command Module:
MDBT42Q-ATM deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42Q-PATM deployed PCB Antenna and offers a good connectivity ability.

For customers looking for Good form factor and Peripheral/Slave Solution may select
MDBT42Q-AT2 deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42Q-PAT2 deployed PCB Antenna and offers a good connectivity ability.

For customers looking for Compact form factor and Peripheral/Slave Solution may select
MDBT42V-AT deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42V-PAT deployed PCB Antenna and offers a good connectivity ability.

Testing & Debug Demo Board
Peripheral/Slave: MDBT42Q-AT2-UART-S
Central/Master: MDBT42Q-AT-UART-M

If you are looking for demo board for standard module WITHOUT AT command, please view MDBT42Q-DB for more information.

List of supported commands
- Setting of scanned device name
- Setting of scanned base UUID/service UUID/TX character/RX character
- Setting of scanned RSSI threshold
- Selective data rate of 1M bps, 2M bps or 125K bps on-air
- Set TX output power in 6 levels.
- Set scanning time
- Enable/disable scanning
- Set LED pattern indicating scanning or connecting status
- Auto UART baud rates
- Use external 32.768KHz oscillator
- Recover-to-default setting with software method
- System reset of software
- Set serial number and retrieve
- Retrieve MAC Address
- Support maximum MTU 247bytes / data payload up to maximum 244 bytes

Specification：                                                                                  
MDBT50Q-RX-ATM Spec (Ver.C)

RoHS & REACH Report：
RoHS & REACH Report for MDBT50Q-RX